SQDMLAL (scalar, by element)
Signed saturating Doubling Multiply-Add Long (by element).
Is the destination width specifier, and can be either
- Is the number of the SIMD and FP destination register.
Is the source width specifier, and can be either
- Is the number of the first SIMD and FP source register.
Is the name of the second SIMD and FP source register:
must be in the range V0 to V15.
must be in the range V0 to V31.
Is an element size specifier, and can be either
- Is the element index, in the range shown in Usage.
Signed saturating Doubling Multiply-Add Long (by element). This instruction multiplies each vector element in the lower or upper half of the first source SIMD and FP register by the specified vector element of the second source SIMD and FP register, doubles the results, and accumulates the final results with the vector elements of the destination SIMD and FP register. The destination vector elements are twice as long as the elements that are multiplied.
If overflow occurs with any of the results, those results are saturated. If saturation occurs, the cumulative saturation bit FPSR.QC is set.
SQDMLAL instruction extracts vector elements from the lower half of the first source register, while the
SQDMLAL2 instruction extracts vector elements from the upper half of the first source register.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
The following table shows the valid specifier combinations:
Table 19-12 SQDMLAL (Scalar) specifier combinations
|S||H||H||0 to 7|
|D||S||S||0 to 3|