You copied the Doc URL to your clipboard.


Dual 16-bit Signed Multiply with Subtraction of products and 64-bit accumulation.


SMLSD{X}{cond} RdLo, RdHi, Rn, Rm



is an optional parameter. If X is present, the most and least significant halfwords of the second operand are exchanged before the multiplications occur.


is an optional condition code.

RdLo, RdHi

are the destination registers for the 64-bit result. They also hold the 64-bit accumulate operand. RdHi and RdLo must be different registers.

Rn, Rm

are the registers holding the operands.


SMLSLD multiplies the bottom halfword of Rn with the bottom halfword of Rm, and the top halfword of Rn with the top halfword of Rm. It then subtracts the second product from the first, adds the difference to the value in RdLo, RdHi, and stores the result to RdLo, RdHi.

Register restrictions

You cannot use PC for any register.

You can use SP in ARM instructions but this is deprecated in ARMv6T2 and above. You cannot use SP in Thumb instructions.

Condition flags

This instruction does not change the flags.


This ARM instruction is available in ARMv6 and above.

This 32-bit Thumb instruction is available in ARMv6T2 and above. For the ARMv7-M architecture, it is only available in an ARMv7E-M implementation.

There is no 16-bit version of this instruction in Thumb.


    SMLSLD      r3, r0, r5, r1